| TYPE |
ELECTRIC |
GAS |
| CAPACITY |
2.0 cu yds |
6' 2.0 cu yds OR 8' 2.5 cu yds |
| MOTOR |
Two ultra-quiet 12V DC direct drive motors power the conveyor and spinner. Encased in heavy-duty housing. Wiring harness constructed of 8-ga. automotive wire. In-cab console w/independent controls for conveyor and spinner |
Heavy-duty 10.5 hp Briggs & Stratton Intek industrial/commercial gas engine. Equipped w/alternator and 12V electric starter. In-cab start/stop and electric throttle control |
| CLUTCH |
|
12V DC electric clutch w/3 position in-cab switch. Allows for low-speed operation and spot spreading |
| HOPPER |
Stainless steel |
Stainless steel |
| CONVEYOR |
12" wide all steel pintle chain with 3/16" x 3/4" cross bars. Chain strength is 11,000 lbs. per strand |
12" wide all steel pintle chain with 3/16" x 3/4" cross bars. Chain strength is 11,000 lbs. per strand |
| FEED GATE |
Lever operated with friction lock for accurate adjustment |
Lever operated with friction lock for accurate adjustment |
| SPINNER CHUTE ASSEMBLY |
12" polymer disc with four fins connected to 3/4" diameter stainless steel shaft secured on pillow block and motor bearing |
12" polymer disc with four fins connected to 3/4" diameter stainless steel shaft secured on twp pillow block bearings |